|
Competition Grade - Approved for Tournament
Use
| Uniform Support Structure |
|
| Offering the utmost in style and support. Solid
hardwood wide-profile top rails provide an elegant furniture
appearance. For an exact fit, aprons are attached at our
Utilizing a grid framework used where two cross beams 1 1/2"
thick run the width of the table. This method of construction
ensures maximum stability. Rest assured, the Uniframe support
system was engineered with strength and longevity in mind.
Showcasing beautiful, hand-crafted solid hardwood cabinets
that are reverse-grained and laminated to resist the natural
tendency of wood to warp or twist. In addition, to promote a
flawless installation, cabinets are assembled, pre-leveled and
squared at our factory. |
|
| Diamond Sights |
|
Exhibiting not only functionality, but form. Genuine
mother-of-pearl inlayed diamond sights are an elegant
compliment to all of our styles.
|
|
| Support |
|
| Sporting
great legs — the corner system is the foundation on which
everything else depends. The highest quality craftsmanship
incorporates over-sized, mortised (recessed) leg connecting
stop block timbers. |
|
| The Finest Slate |
|
| Promising
a level playing ground. Just below the surface of every
table lies the highest quality, purest, diamond-honed
slate available anywhere on Earth. The three-piece, oversized
one-inch (1") slate is matched and diamond-honed to a flatness
far exceeding the BCA's requirements — creating a smooth, even
and consistent playing surface on every table. The slate rests
on a 3/4" slated-liner made of hardwood that is precision-cut,
milled, and laminated, providing a quieter game, tighter cloth
installation, and a truer playing surface that will endure the
test of time. |
|
| Rail System |
|
|
Offering the utmost in style and support. Solid
hardwood wide-profile top rails provide an elegant furniture
appearance. For an exact fit, aprons are attached at our
factory. The floating nut plate secures the rail and apron to
the slate bed with unyielding torque strength; allowing for
exact alignment.
The cushions are made from Billiard Congress of America
tournament-approved 100% natural gum rubber with no fillers or
stabilizers added. They are molded to a k-66 profile with
control-fabric backing. This backing ensures that the rubber
permanently adheres to the wood and that the felt does not
loosen or move, allowing for a maximum speed on each shot.
Solid hardwood sub-rails are designed to deliver optimal ball
response. They are reverse grained and laminated to add weight
and density, thus resisting the balls impact and allowing for
the cushion to absorb and react to the energy transference. In
addition, the cloth relief lets the rail system securely lay
flush to the slate for added symmetry as well as
strength. |
| |
